Best Mountain Bike Bar Ends [Review] in 2020
Last Updated on September 29, 2020
This guide has been written by Cycle expert Alex Bristol
Check out the results fast - here are our review winners
Mountain bike bar ends are primarily for mountain bikers and touring cyclists for additional comfort and protection while cycling uphill. The best mountain bike bar ends are beneficial as they enable you to move your hands into a better position when one gets out of the saddle while cycling uphill.
The product provides a better grip position and improved efficiency because of the movement they provide. In this article, we will present a few of the best mountain bike bar ends so that it becomes easier for you to decide which one to get for yourself.
We've spent the time so you don't have to:
Best Mountain Bike Bar Ends
BBB Classic Bar Ends BBE07
Top Choice Item
BBB Classic Bar Ends BBE07 is of one piece forged 6061 T6 aluminium material which makes it a great mountain bike bar end. This bike bar has a slightly curved shape which follows the contours of your hand. It provides superior rigidity and durability.
The length of this bike bar end is 150 mm, and weight is 144g. You can fit this end bike bar with the use of screws. It provides an easy fit and is long enough to get a good hold on away from the bars.
- Curved shape
- The finish may be a bit fragile
Latest deal: BBB Classic Bar Ends BBE07
BBB LightStraight Bar Ends BBE17
Prime Picked Item
BBB Light Straight Bar Ends BBE17 is of one-piece 3D forged 6061 T6 aluminium bar ends. The material of this bar end is Aluminium alloy. This bike bar is lightweight and provides superior strength and stiffness.
It provides anatomically shaped for a firm, comfortable grip. The size of this bike bar is 95mm. You can fit these bike bars into the bike easily with screws. This bike bare weighs only 104 grams per pair.
- Easy to install
- Kind of a thin grip
Latest deal: BBB LightStraight Bar Ends BBE17
Ritchey Comp Bar Ends 2020
Best Value Item
Ritchey Comp Bar Ends provides more versatility to your handlebars set up. These bar ends are of high quality and provide maximum performance and control. It helps in providing leverage on steep climbs and more hand positions on longer rides.
The bar ends offer superior freedom and customization. The bars are of two-piece bonded 6061 aluminium. This material makes these bars incredibly strong to handle all the challenges of a day in the saddle.
- Aluminium material
- Superior freedom
Latest deal: Ritchey Comp Bar Ends 2020
Dimension Forged Bar Ends Short Silver
Dimension Forged Bar Ends Short Silver are excellent extensions for a flat bar. The material for this Dimension Forged Bar Ends Short Silver is a 1-piece forged. It has a length of 150 mm and weighs 172g. You can get this bar in black and silver colour.
These bar ends are of high quality and offer maximum performance and control. Its installation is easy as you can fit these bike bars to the bike easily with screws.
- Easy installation
- Pretty long for short
Latest deal: Dimension Forged Bar Ends Short Silver
Ritchey WCS Bar Ends (85mm)
Ritchey WCS Bar Ends (85mm) provides perfect grip and excellent performance. It has a length of 85mm and has a WCS logo on it. These bar ends are lightweight and have cutting edge innovation. It comes with inward angle and is perfect for use with Riser bars.
The material of these end bars of the bike is 3D Forged 6061. It weighs just 65 grams and has an angle clamp slot that reduces stress on lightweight alloys or carbon fibres.
- Inward angle
Latest deal: Ritchey WCS Bar Ends (85mm)
Origin8 Pro-Lite Bar Ends
Origin8 Pro-Lite Bar Ends are suitable for slightly curved city cruiser bike handlebars. It provides the capability to get down in a more crouched position to cut down on headwinds. The bike bar ends with extra leverage when going up steep inclines.
It has minimalist 85mm extension and bright anodized finish. The bike end bars have ultra light-alloy construction. The weight of the pair is 110g and provides a great fit.
- Slightly curved
- Extra leverage
- Allow construction
- A little short
Latest deal: Origin8 Pro-Lite Bar Ends
Profile Designs Brief Bar End
Profile Designs Brief Bar End provides grip for long trips. These bar ends are of monolithic lightweight alloy. They come with 7mm Allen bolts to tighten these ends to the bars. These bar ends are just chrome plated.
You don’t need to cut about 1/2 inches off the end of my grip to install it. It comes with plugs to make the installation look great. These bar ends look very sturdy and secure.
- Easy Installation
- Won’t fit larger bars
Latest deal: Profile Designs Brief Bar End
Saleting 2 Pcs Bicycle Handle Bar Ends
Saleting 2 Pcs Bicycle Handle Bar Ends is of high-quality material which is T700 carbon fibre. It has a diameter of 22.2mm and length of 125mm. The bar ends weighing 120g and comes with 1-year warranty service.
The product provides a grip on long trips and is strong enough. You can easily install these handlebars on the bike to get a good grip. It can produce more leverage when climbing steep grades.
- High quality
- Sore wrist issue
Latest deal: Saleting 2 Pcs Bicycle Handle Bar Ends
Best Mountain Bike Bar Ends Buyers Guide
Summary of the Post
Many questions arise in one’s mind while buying the bar ends such as price, advantages, best one and much more. You should get information about the product before getting it, and the information should always be authentic and trustworthy so that the product picked up can be reliable.
It would be good for you to compare different products based on quality, features, pros and cons and make a list of those products. After that, you can go for the one that suits your requirements the most. One should look at the cost of the product first to know whether it lies in the range or not and should process onwards after it.
The customers give the ratings and reviews also matters so you can get the best one by reading the reviews. One can get the right product after doing the right research on the product. You should look at the features of the product for mountain bike bar ends you could see the products installation process and material.
Recurring Best Features
The following are some recurring features of the products mentioned above in the article:
Material – While buying bar ends for your mountain bike material plays a significant role. There is a direct impact of material on pricing. The better the content, the more will be and the weaker the material lower will be the price. If the bar ends are of good material, they will last longer and will provide great movement and safety while cycling up hills.
The best materials for bar ends can be carbon fibre and Aluminium. You can check the different products to get the best material. Most of the products mentioned above have good material so you can compare them to get a good mountain bike bar ends that suits your requirements.
Design – Design is another factor that plays a significant role in buying the mountain bike bar end. There should be curving in the design as it is the main feature seen at the bike bar ends. Most of the above-mentioned products have a good design so you can compare them to get a good mountain bike bar ends that suits your requirements.
Frequently Asked Questions (FAQs)
The questions given below are the ones people often ask about how the best mountain bike bar ends:
Why use bar ends on a mountain bike?
There is a need to use bar ends on mountain bikes to increase leverage. It is difficult to cycle, and it becomes more difficult if there’s nothing to leverage the pull-up. The mountain bike bar ends up, making it easier to ride uphill by increasing leverage.
What happened to the bar that ends on mountain bikes?
The bar ends on mountain bikes and moves your hand position in a little. It provides a cramped feel at the controls and increases your horsepower on the climbs by 10%. The bar ends provide great grip, and the hand position for out-of-the-saddle effort feels more ergonomically correct at the bar end. It becomes difficult to get a grip if there’re no bar ends on the mountain bike; thus, it’ll become difficult to ride on mountain trails.
Are the bar ends really necessary?
There is a need for the bar to end on mountain bikes for the purpose of protection. They can provide damage if your handlebars are wide enough and/or your bike is narrow enough.
It is quite challenging to buy the best mountain bike bar ends as there are thousands of products in front of you in the market, and you’ve to choose one out of the many available. You’ll get different types of bike bar ends in the market, but you should go for the right one by making a comparison.
If you want to get the best one that suits your needs and preferences, then you should do some research on each product and its features as every product has different features. The cost of the product is also an important factor to consider before buying any product to get the list of the products lying in your range.
There is a need for a mountain bike bar end for protection purposes as it becomes difficult to get a grip on the bike without bike bar ends. It can be challenging for you to ride uphill without the end bars. Moreover, each brand of bike bar ends has different features so you can get the right one by looking at each.
All the products mentioned above in the article provide the required features which are necessary to have so you can have a look at all of them for comparison. Additionally, you can always visit the respective links given in the article for further information regarding any specific product.
Content Manager at Pedallers
Alex is a cycling expert at and focuses on reviewing bikes, accessories, and general cycling. He searches for the most up to date products that match the needs of cyclists across the world. Whether it's recent news or the best bike set-ups, Alex is a trusted source for anything around cycling.