Home » Controls » How To Clean Road Bike Cassette

How To Clean Road Bike Cassette

Last Updated on

This guide has been written by cycling review expert Alex Bristol

Last Updated on

Key knowledge on road bike cassette:

If lately the question of how to clean road bike cassette has been on your mind. Then, you have landed on a jackpot here. Usually, not many bikers tend to take great care of the bike cassette, but instead they focus on the dirty chain of the bike.

No need to search more, you have a complete guide from our side on how to clean your road bike cassette. Thus, your bike’s performance is not of any inconvenience while you cycle your way through many terrains.

We also need to be more aware of the importance of the cassette, as any wear, or tear results in compromising other parts of the bike. These crucial parts are quite hefty on the pocket; therefore, keeping them clean and organized helps the individual owning the bike.

Cleaning and maintenance:

It is crucial that any biker should be aware of the fact that not every time you need to separate the cassette from the bike wheel. The dirt and grease can be cleaned in an efficient way in either way one feels comfortable, with or without the additional effort.

Henceforth, it is among the primary care routines of a professional biker to keep the chain after a ride and wipe off excess grease. If you are among the habit of maintenance of your vehicle, then wiping down a bike cassette would not come of as much hassle.

It is quite an easy job, once you get a hang of it with or, even without fancy cleaning equipment. Apart from this building a habit is essential.

What can be used to clean the road bike cassette?

As simple as it sounds, the following is a short list of what can be used to clean the road bike cassette any day, any time:

  • A degreaser
  • A worn-out t – shirt, or rag
  • A spare, or old toothbrush

Step by step cleaning techniques to use:

The first and foremost to make your life much easier is to remove the rear wheel of your bike. Wondering what benefit it would be while the wheel is removed? It is quite obvious, more space will be created to remove grease off the frame.

The sprockets are easier to clean, and it is your individual preference of whether you hold, or lay down the wheel. Sometimes bikers tend to lay down the wheel in their lap, and then, clean the sprocket facing towards them.

It is all up to you and your convenience. Next, you require a bowl with some degreaser in it. Then, either dip your worn-out t – shirt, or old tooth brush in it. Now, it becomes the biker’s duty to pay close attention to detail.

Get started off with the largest sprocket and maneuver the rag, or brush, along and between each sprocket. This is continued till all the sprockets are cleaned and the hub of the wheel is achieved. You would notice clumps are tough to take off.

Thus, in times of need, a handy dandy old toothbrush is the best way to get those tough grease spots off. The entire bike cassette will be cleaned in no time.

Source:

How to Clean Your Bike Cassette – Post by Mapmyrun 

Related Post: Best Gear Cassette For Road Bikes [Review]

Pin It on Pinterest